[. . . ] The configuration or configurations tested or described may or may not be the only available solution. This test is not a determination of product quality or correctness, nor does it ensure compliance with any federal, state or local requirements. [. . . ] Microsoft and Windows are trademarks of Microsoft Corporation in the U. S. and other countries Pentium is a trademark of Intel Corporation in the U. S. Other product names mentioned herein may be trademarks and/or registered trademarks of their respective companies. Compaq shall not be liable for technical or editorial errors or omissions contained herein. The information in this document is provided "as is" without warranty of any kind and is subject to change without notice. The warranties for Compaq products are set forth in the express limited warranty statements accompanying such products. Extract the files from AMDK6upd. exe to the floppy by executing AMDK6upd. exe /T:a:\ /C. When the error occurs (which should be on first actual boot into Windows 95) or the machine simply does not start Windows 95, boot the machine using the bootable floppy created in Step 1. Manually copy the updated driver files on the diskette to their proper locations. A batch file can be created to perform this task if it will be repeated numerous times. Copy each of the following files into these locations: 15XM-1101A-WWEN Configuring Compaq Evo for Microsoft Windows 95 White Paper 4 scsiport. pdr--Copy to C:\Windows\System\IOSubsys. If the version of Windows 95 is OSR2. 1 or OSR2. 5: ntkern. vxd--Copy to C:\Windows\System\VMM32. [. . . ] If the version of Windows 95 is OSR2. 1 or OSR2. 5: ntkern. vxd--Copy to C:\Windows\System\VMM32. Note: These paths assume that Windows 95 is being installed to C:\Windows. [. . . ]